Guide · Updated October 29, 2026
How to apply a Gmail filter to existing emails
To apply a Gmail filter to existing emails, tick “Also apply filter to matching conversations” when you create or edit the filter. Gmail then runs the filter’s actions once on every conversation that already matches, archived mail included. This guide shows the steps for a new filter and for one that exists, the manual way for a one-off clean-up, and the actions that never reach back. It goes deeper on one part of our Gmail filters guide.
Read-only, about a minute. Nothing in your mailbox changes.
Can a Gmail filter run on emails you already have?
Yes. Gmail filters only act on new mail by default, but when you create or edit a filter you can tick “Also apply filter to matching conversations”, and Gmail runs the filter’s actions once on every conversation that matches, including archived mail and mail from years ago. It happens once, at the moment you save the filter. After that the filter goes back to watching new mail only, so if you add more actions later you tick the box again.
The box is easy to miss. It sits at the bottom of the actions list, under “Never send it to Spam” and “Categorize as”, and it is unticked every time, even when you are editing a filter that already exists.
Apply a new filter to existing emails
- Open the search options. In Gmail on the web, click the sliders icon at the right end of the search box.
- Fill in the conditions and click “Search”. The results are exactly the conversations the filter will act on, so check them before you go further. If the list is wrong, change the conditions here rather than after.
- Click “Create filter”, next to the Search button.
- Tick the actions you want: “Apply the label”, “Skip the Inbox (Archive it)”, “Mark as read”, “Star it”, and so on.
- Tick “Also apply filter to matching conversations”, then click “Create filter”. Gmail shows how many conversations it will change.
For large mailboxes the actions can take a few minutes to appear everywhere. Searching for the label a little later shows the full set.
How to run a Gmail filter on existing emails
- Open your filters. Click the gear icon, “See all settings”, then the “Filters and Blocked Addresses” tab.
- Click “edit” next to the filter. Gmail opens its conditions; leave them as they are, or widen them if the filter has been missing mail.
- Click “Continue” to reach the actions.
- Tick “Also apply filter to matching conversations”, then click “Update filter”.
One thing to know before you click: Gmail re-runs the filter on every conversation that matches the conditions, not only on what is in your inbox. A filter with “Skip the Inbox” and a label will label mail that is already archived too, which is harmless, but a filter with “Delete it” will delete every match in your mailbox, archived or not. Search the conditions first if the filter deletes anything.
The manual way, for a one-off clean-up
If you don’t need a filter at all, just a tidy-up of what is there, do the same thing by hand. You get to see each step and nothing is left running afterwards.
-
Search with the conditions you would have put in the filter, for example
from:news@example.com older_than:1y. - Tick the select-all box above the results. Gmail selects the conversations on the current page only, usually 50.
- Click “Select all conversations that match this search”, the line that appears above the list. Without this click, the next action touches 50 conversations and leaves the rest alone, which is the most common reason a clean-up seems to have half worked.
- Choose the action from the toolbar: the label icon to apply a label, the archive icon, the three-dot menu for “Mark as read”, or the bin.
“Select all conversations” has no undo once the action runs, apart from dragging mail back out of the bin within 30 days, so read the count Gmail shows before you confirm.
What doesn’t apply to existing emails
- “Forward it to”. Forwarding only happens as mail arrives. Ticking the box does not send your old mail to the forwarding address; to do that, open the conversations and forward them yourself.
-
“Never send it to Spam”. This decides where new mail lands. It does not
pull existing mail out of your Spam folder; search
in:spamand click “Not spam” for those. - Whole conversations, not single messages. Gmail filters match conversations. If one message in a ten-message thread matches your conditions, the label goes on the whole thread, and “Skip the Inbox” archives all of it. For a sender who replies inside long threads with other people, this can label more than you meant.
- Mail in Spam and the bin. The box applies to conversations in your mailbox. Mail already in Spam or in the bin is normally left where it is.
Can you re-run a filter on a schedule?
No. Gmail has no setting that runs a filter again every night or every week, and “Also apply
filter to matching conversations” is a one-time pass. The practical workaround is to make the
filter’s conditions relative, so new mail matches as it arrives: older_than:
can’t do that in a filter, because a filter sees each email once, on arrival, when it is zero
days old. If you really need “archive anything over 30 days old from this sender” to happen on
its own, that takes a short Google Apps Script bound to your account and a time trigger, which
is outside what Gmail’s own settings offer. Most people get the same result by giving the
sender a filter with “Skip the Inbox” and a label, so there is never a backlog to clear.
On a phone
The Gmail apps can’t create or edit full filters, and they have no equivalent of “Also apply filter to matching conversations”. Open Gmail in a desktop browser once; the filter and its one-time pass run on the server, so the results show up on your phone a moment later. The manual way works partly on a phone: you can search and select conversations, but the apps select only what you tap, with no “select all that match” step.
Clean up once, per sender, with Syfft
Syfft handles the two halves of this job separately, and only the second one touches existing mail. Its AI labels are added to new mail as it arrives, one of its labels, within about a minute, and never to mail that was already there. The one exception is the sort you see when you connect: once you keep your setup, those 50 emails get the labels you saw, and nothing older.
Sender rules are different, because moving mail is the point. After the sort, Syfft suggests an inbox rule for each group of senders behind your newsletters, promotions, automated updates and receipts. When you confirm one, it is written as an ordinary Gmail filter, and you can ask Syfft to apply it once to the mail already in your inbox from those senders. That is the Clean up pass: it runs per sender, shows what it changed on the dashboard, and “Put back” returns a sender’s mail to the inbox and takes that sender out of the rule. It needs the Basic plan, $25 a month or $20 a month billed yearly, from the 14-day trial on. The filter itself lives in your Gmail settings and keeps working whether or not Syfft is connected.
Related guides
Questions about filters and existing mail.
See all questionsI created a filter and nothing happened to my old emails. Why?
The box “Also apply filter to matching conversations” was unticked, which is the default. Edit the filter under Settings, “Filters and Blocked Addresses”, click “Continue”, tick the box and click “Update filter”.
Does “Also apply filter to matching conversations” touch archived mail?
Yes. It runs on every matching conversation in your mailbox, in the inbox or not. Only mail in Spam and the bin is left alone.
Can I undo a filter I applied to existing emails?
Not with one click. Deleting the filter stops it running but leaves the labels, archiving or deletions in place. Search for the label, select all matching conversations and reverse the action by hand; deleted mail can be moved out of the bin for 30 days.
Does Syfft label the emails I already have?
Its AI labels go on new mail only, plus the 50 emails from your sort once you keep your setup. Existing mail is touched only by a sender rule you confirm, through Clean up, per sender, with “Put back” to undo.
Can I apply a filter to existing emails from the Gmail app?
No. The apps can’t create or edit full filters. Do it once in a desktop browser; the results appear on your phone because filters run on Gmail’s servers.
See what Syfft finds in your inbox.
Connect Gmail or Outlook and see the labels on your 50 most recent emails. Read-only, and it takes about a minute.