Guide

Email triage: a method for Gmail and Outlook

Email triage is deciding what each email needs from you before you act on any of it: a reply, a task, a read later, or nothing. This guide gives you four questions to ask of every email, a triage pass you can do with the tools already in Gmail and Outlook, and what triage software can take over.

Read-only, about a minute. Nothing in your mailbox changes.

What email triage is

The word comes from emergency rooms, where staff sort arrivals by what each one needs before treating anyone. Email triage is the same move. You go through the inbox once and decide, for each email, what it needs from you: a reply, something to do, something to read later, or nothing at all. Only then do you act, and you act on the group that matters first.

Triage is not answering email. It is the step before answering, and it is quick because deciding takes seconds while replying takes minutes. An inbox that has been triaged still has mail in it; the difference is that every email in it has a decision attached.

Why an inbox fills up without it

Without triage, the inbox is one list in date order, and every email in it looks equally urgent. You open the newest, reply to the easy one, leave the hard one for later, and scroll past the newsletter. The hard one scrolls down with the newsletter. By the end of the week the question you owe someone, the invoice due Friday and forty notifications sit in the same list, and the only way to find the first two is to read all of them again.

That rereading is the cost. Each email you open and leave undecided gets opened again tomorrow. Triage replaces rereading with one decision per email, made once.

If the pile is already out of hand, start with what to do when you have too many emails, then come back here for the routine that keeps it that way.

The four questions to ask of every email

Most triage methods have too many categories. Four questions cover what actually changes how you handle an email, and you can answer them from the subject line and the first lines more often than not.

  1. Does it need a reply from me? Someone asked you something, or is waiting on a decision. This is the group to clear first, because every day it sits, someone else is stuck.
  2. Is it waiting on someone else? You asked, they haven’t answered, or you sent work and are waiting on the response. These need a follow-up date, not a reply.
  3. Does it carry a date or an amount? A due date, a cutoff, a meeting time, a bill. The email itself may need nothing from you today, but the date does.
  4. Is it noise, or a risk? Newsletters, promotions and automated notifications can be read later or never. Anything asking for a password, a payment or a gift card from an address you don’t recognise is a risk, and the right action is to leave it alone and report it.

An email that answers no to all four is done the moment you’ve read it: archive it. An email that answers yes to the first gets a reply or a short holding note. The rest get a mark, a date or a label so you can find them without searching.

A triage pass in Gmail

Gmail has everything the four questions need, if you use it deliberately. Here is one way to set it up on the web, with the real menu steps.

  • Star what needs your reply. Hover a row and click the star, or press s with the row selected. Under Settings, “See all settings”, “General”, “Stars”, you can turn on more star shapes and use a second one for “waiting on them”. is:starred in the search box lists them all.
  • Give the groups their own sections. Click the gear icon, and under “Inbox type” choose “Priority Inbox” to get Important and unread, Starred and Everything else in separate blocks. Or choose “Multiple inboxes”, click “Customize”, and give each section a search, such as is:starred for your replies and label:waiting for mail you’re waiting on.
  • Label dates and amounts. Select the email, click the label icon above the list or press l, and pick a label such as “Due” or “Bills”. Create new ones from the same menu. Labels stay with the email after you archive it, so the inbox can empty without losing the date.
  • Snooze what has a date. Hover the row and click the clock icon, or press b, and pick the day the date becomes relevant. The email leaves the inbox and comes back at the top on that day.
  • Archive the rest. Press e or click the archive icon. Archived mail is in “All mail” and in search, so nothing is lost; it just stops being on the list you look at. If keyboard shortcuts don’t respond, turn them on under “See all settings”, “General”, “Keyboard shortcuts”.

For noise, the better fix is a filter that labels the sender for you from now on; Gmail filters shows how.

A triage pass in Outlook

In new Outlook and Outlook on the web, the pieces are flags, categories, Focused Inbox, Sweep and rules. Together they cover the same four questions.

  • Flag what needs your reply. Hover a message and click the flag, or select it and press Insert. Right-click the flag to set a due date. Flagged mail shows up under “Flagged” in the folder list and in To Do, so your reply list lives in one place.
  • Categorise dates, amounts and waiting. Select a message and click “Categorize” on the Home ribbon, then pick a colour or “New category”. Name one “Waiting”, one “Due”, one “Bills”. Manage them under Settings, “General”, “Categories”. A category is a tag, so it stays with the message in any folder.
  • Let Focused Inbox split the noise. On the View ribbon, turn on “Show Focused Inbox”. Outlook puts mail it considers less important under “Other”. Right-click a message and choose “Move”, then “Always move to Other inbox” or “Always move to Focused inbox” to correct it. Outlook Focused Inbox covers what it gets wrong.
  • Clear a sender with Sweep. Select a message and click “Sweep” on the Home ribbon. You can move everything from that sender, keep only the latest, or move mail older than ten days, and tick the option to keep doing it for new mail. Sweep moves mail, so pick a folder you’ll check rather than Deleted Items for anything you might want.
  • Turn repeat decisions into rules. Right-click a message, choose “Rules”, then “Create rule”, and Outlook offers the sender and a folder. For conditions on subject or recipient, open Settings, “Mail”, “Rules”. Outlook rules has the full walk-through.

A daily routine

Triage works when it is a few passes a day, not a constant one. Two or three is enough for most people: one in the morning before the day’s work, one after lunch, one before you stop. Each pass is the same: go through everything that arrived since the last pass, ask the four questions, star or flag, label or categorise, snooze, archive. Then reply to the starred or flagged ones in one sitting.

Between passes, leave the inbox closed, or at least don’t act on it. The point of triage is that a new email no longer interrupts you with a decision, because the decision has a time. If a sender is important enough that you need to see their mail the moment it arrives, give them a rule that stars or flags it, rather than watching the whole inbox for one person.

What triage software does, and what to ask of it

Everything above is manual: you answer the four questions for each email. Email triage software answers them for you. It reads each email as it arrives and marks what the email needs, so your pass starts with the sorting already done, and you spend it on the replies.

The tools differ a lot in what they do with the answer. Before trusting one, ask:

  • Does it move mail? A tool that files, archives or hides mail is making decisions you can’t see. Marking, with a label or a category, leaves the inbox where you can check it.
  • What does it do when it is unsure? The honest answer is nothing. A tool that forces every email into a category will put the wrong ones somewhere you won’t look.
  • Can you undo it? Every mark should be logged and reversible, one email at a time and all at once.
  • Does it keep copies of your mail? Reading an email to label it doesn’t require storing it. If a tool stores anything, it should say what, for how long, and how to delete it.
  • What does it cost? A price you can see before you connect anything, and a way to see the tool work on your own mail before you pay.

Where Syfft fits

Syfft does the marking. As each email arrives, it adds a label inside Gmail, or a category in Outlook, within about a minute, and the email stays in the inbox unless you turn Skip the inbox on for that label. The labels map onto the four questions. Your turn and Their turn answer the reply question: who owes whom, and the label comes off when the conversation moves on. Deadline mentioned and Invoices answer the date-and-amount question. Newsletters, Promotions and Automated updates answer the noise question, and Phishing, Spam and Scam answer the risk question. The other labels, such as Receipts, Meetings & calendar and Documents to sign, cover the things people usually label by hand.

When Syfft isn’t sure, the email gets no label. It never deletes, drafts or sends mail; beyond a label’s Skip the inbox switch, the only thing in Syfft that moves mail is a sender rule you confirm yourself, an ordinary Gmail filter or Outlook rule for a sender it labelled. Every label is logged on your dashboard and can be undone, one at a time or all together.

It shows its work first. You connect Gmail or Outlook, and Syfft tries its labels on your 50 most recent emails so you can see what each one would have caught. If you keep it, the Basic plan is $25 a month, or $20 a month billed yearly, after a 14-day trial with a card. The Plus plan, coming soon, adds email search. Details are on the pricing page.

Triage is one part of a routine. For the rest of it, see Inbox management; for the Gmail setup in depth, How to organize your Gmail inbox.

See what Syfft finds in your inbox.

Connect Gmail or Outlook and see the labels on your 50 most recent emails. Read-only, and it takes about a minute.